> ## Documentation Index
> Fetch the complete documentation index at: https://www.docusnap.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Scanning IP Phones

> Capturing IP phones with vendor, model, firmware and network addresses—without credentials.

The *IP Phones* scan module captures IP phones on the network. It belongs to
the *Network* category and needs no credentials. It requires a connected
[gateway](/docs/en/scan/gateway-install).

## Captured data

Each phone becomes an asset of the type *IP Phone* with vendor, model,
firmware, IP address and MAC address. How the detail page of the type is
structured is described in [Network and Devices](/docs/en/assets/network-devices).

## Setting up the job

The wizard follows the standard path *Basics* › *Targets* › *Schedule* ›
*Summary*—see [Creating a Scan Job](/docs/en/scan/create-inventory).

In the *Targets* step each row carries only the *IP/Hostname* column—the scan
needs no credentials. The column takes a single address, a range, a network in
CIDR notation (e.g. /24) or a hostname, so a whole network fits into one row.

## Related

After it is created, the job appears among the jobs; how you watch and adjust
it is in [Managing Jobs](/docs/en/scan/manage-jobs). You capture further network
devices with [SNMP](/docs/en/scan/snmp).


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.